Schwibbogen Decoration
assembly instructions below
Please scroll down for different design assembly
Starry Night
Tealight style Schwibbogen
The Tree design and lantern design also goes the same way
Layer the arches in this order so that the vellum is sandwiched by the 2 front arch sections. Do the same for the back arch
Your finishes arch section will look like this
Glue the spacer where you see the green highlight on the image to the right
There are dash location marks on the arches for you to line the spacers up with the glue tabs fold upwards
Now fold the other end of the spacer upwards and apply glue
Line up the second arch with the glue tabs making sure you keep it in line with the other arch as you see in the lower image on the left
Now slot the bottom of the arches into the base open out the glue tabs and glue in place thi will make the arch stand upright.
The spacers are also tea light shelves they just sit on the shelf
Woodland walk
String light style Schwibbogen
 |
There are 3 arches to the design
Step 1
Cut 2 of each arch and glue together for strength
Step 2
add the spacers to the back arch using the dash line location marks, glue tabs fold upwards
step 3
fold the other side of the glue tabs upwards and apply glue and put the middle arch over the top and position so that the glue tabs fall in the same place as on the the one you already did.
step 4
do the same again for the front arch
Then open the arch out so that it's now a 3D object like in the image above bottom right
step 5
slot the bottom tabs of the 3 arches in to the 3 slots on the base section
Open out the glue tabs and glue in place, then stand the arches upright and let dry.
steps 5 6 and 7
Slot in the layers of the scene into the slots in the base
step 8 glue in the 2 front tree layers in front of the arch
Step 9
glue to the main base to hide all the glue tabs and make stable
